logo
Nanjing Zhitian Mechanical And Electrical Co., Ltd.
products
products
Home > products > Extruder Screws And Barrels > High Wear Resistance Twin Screw Extruder Barrel Laser Cladding Inner Wall for Sheet Profile WPC Industries-Automatic New Used

High Wear Resistance Twin Screw Extruder Barrel Laser Cladding Inner Wall for Sheet Profile WPC Industries-Automatic New Used

Product Details

Place of Origin: Jiangsu, China

Brand Name: zhitian

Model Number: Customize

Document: Screw Barrel & Elements.pdf

Payment & Shipping Terms

Minimum Order Quantity: 1

Price: Timely Quotation

Packaging Details: Wooden Case

Delivery Time: 10-60 Days

Payment Terms: T/T,L/C

Supply Ability: 500 Sets / Month

Get Best Price
Highlight:

twin screw extruder barrel for WPC

,

high wear resistance extruder barrel

,

PP PE PET processing extruder barrel

Product Name:
Wear-Resistant Twin Screw Extruder Barrel
Extruder Type:
Co-rotating Parallel Twin Screw Extruder
Inner Surface Technology:
Laser Cladding
Wear Layer Material:
Nickel-Based Alloy; Composition According To Approved Specification
Bore (mm):
According To Confirmed Drawings
Center Distance (mm):
According To Confirmed Drawings
Cooling Channels:
Layout And Connections According To Equipment Requirements
Application:
WPC And PP, PE Or PET Compounding, Subject To Formulation Review
Product Name:
Wear-Resistant Twin Screw Extruder Barrel
Extruder Type:
Co-rotating Parallel Twin Screw Extruder
Inner Surface Technology:
Laser Cladding
Wear Layer Material:
Nickel-Based Alloy; Composition According To Approved Specification
Bore (mm):
According To Confirmed Drawings
Center Distance (mm):
According To Confirmed Drawings
Cooling Channels:
Layout And Connections According To Equipment Requirements
Application:
WPC And PP, PE Or PET Compounding, Subject To Formulation Review
High Wear Resistance Twin Screw Extruder Barrel Laser Cladding Inner Wall for Sheet Profile WPC Industries-Automatic New Used
Wear-Resistant Twin Screw Extruder Barrel with a Laser-Clad Inner Surface

ZHITIAN supplies twin screw extruder barrels with a laser-clad inner surface for co-rotating parallel extrusion equipment. The barrel combines the required installation geometry and cooling arrangement with an alloy working surface selected for the processing conditions.

This configuration can be reviewed for WPC and PP, PE or PET compounding applications. Selection depends on the complete formulation, including fillers, reinforcement, additives and recycled content. The polymer name alone does not define the wear conditions or establish which alloy should be used.

High Wear Resistance Twin Screw Extruder Barrel Laser Cladding Inner Wall for Sheet Profile WPC Industries-Automatic New Used
Type Of Barrels Materials
 

 
 
Solid Barrel
 






Hastelloy-C Alloy,
38CrMoAla,
304/316/316L Stainless Steel
High Wear Resistance Twin Screw Extruder Barrel Laser Cladding Inner Wall for Sheet Profile WPC Industries-Automatic New Used


Direct Compound Barrel



ZT610 Ni60 Based+Cu,
ZT615 Ni60 Based,
ZT625 Ni60 Based+Tungsten carbide,
HIP Cobalt Based+Tungsten carbide.
High Wear Resistance Twin Screw Extruder Barrel Laser Cladding Inner Wall for Sheet Profile WPC Industries-Automatic New Used


 


Complete Liner Barrel
 
 
 

38CrMoAla Liner,
440C Stainless Steel Liner,
Cr12MoV Liner,
SKD11/SKD61 Liner,
DC53 Liner,
W6Mo5Cr4V2 Liner,
ZTCr26 Liner,
SAM26/WR13 Liner,
CPM10V/WR5 Liner,
ZT610 Ni60 Based Liner+Cu,
ZT615 Ni60 Based Liner,
ZT625 Ni60 Based Liner+Tungsten carbide,
HIP Cobalt Based Liner+Tungsten carbide.
High Wear Resistance Twin Screw Extruder Barrel Laser Cladding Inner Wall for Sheet Profile WPC Industries-Automatic New Used
 

Compound Alloy Liner Barrel



S45C+ZT610 Ni60 Based Liner+Cu
S45C+ZT615 Ni60 Based Liner,
S45C+ZT625 Ni60 Based Liner+Tungsten carbide,
S45C+HIP Cobalt Based Liner+Tungsten carbide.

A Wear Layer Applied to the Working Bore

Laser cladding deposits alloy material onto the prepared substrate to form a metallurgically bonded layer. The working bore is subsequently finished to the approved dimensions and surface requirements.

The layer provides the material surface exposed to the processed compound. Its performance depends on alloy composition, deposition quality, finished geometry and operating conditions. Layer thickness and hardness should therefore be specified for the selected material and component rather than presented as universal values.

For a replacement project, the proposed construction should identify the barrel body material, cladding alloy and finished bore requirements separately. This makes the technical specification clearer than describing the complete barrel simply as “nickel alloy.”

Match the Alloy to the Actual Formulation

Different formulations can place different demands on the same nominal barrel size. A wear-resistant specification should begin with the material being processed and the condition of the previous barrel.

Processing Application Information Needed for Review
WPC formulations Polymer carrier, wood flour content, mineral fillers and additives
Filled PP or PE Filler type, loading percentage and previous wear distribution
Reinforced compounds Reinforcement type, concentration and affected processing sections
PET-based compounds Virgin or recycled feedstock, additives and observed surface damage

Where corrosion is suspected, provide information about the processed ingredients and operating history. Wear resistance and corrosion resistance are separate selection considerations; an alloy should be reviewed against both where the application requires it.

Bore Geometry and Screw Clearance

The replacement barrel must match the screw assembly and the surrounding barrel sections. Bore dimensions, center distance and alignment influence the working relationship between the screws and barrel.

Before production, confirm:

  • Bore geometry: working dimensions and the required profile.

  • Center distance: the relationship between the two screw axes.

  • Section length: compatibility with the existing barrel arrangement.

  • End faces and locating features: connection to neighboring sections.

  • Screw condition: available measurements and relevant wear information.

A new barrel should not be assessed independently of the screw elements running inside it. Existing screw wear may affect the resulting clearance even when the replacement barrel follows the correct drawing.

Cooling Channels and Equipment Connections

The barrel’s cooling arrangement should match the equipment layout and the requirements of the processing zone. Channel routing, connection positions and access for maintenance need to be reviewed before manufacturing.

Please provide the cooling inlet and outlet locations, connection specifications and available drawings. Heater mounting surfaces, thermocouple positions and other external interfaces should also be included where applicable.

When replacing a barrel associated with temperature-control problems, inspect the existing cooling circuit as well. A replacement component cannot resolve restrictions or poor circulation elsewhere in the system.

Manufacturing and Inspection Requirements

Production follows the approved barrel drawing and agreed material specification. The manufacturing plan must account for the substrate, cladding process and final machining requirements.

Inspection can cover bore dimensions, center distance, section length, end-face relationships and cooling connections. Material records, hardness checks and any additional cladding inspection requirements should be agreed before quotation.

Dimensions need defined reference conditions, particularly when comparing measurements taken at different temperatures. Inspection records should identify the relevant drawing requirements rather than use one general tolerance for every feature.

Replacement Planning and Delivery

For a worn barrel section, send photographs showing the inner surface, end faces and external connections. Identify its position in the barrel assembly and describe the reason for replacement.

A worn sample can support measurement, but its working bore may no longer represent the original dimensions. Original drawings, screw information and neighboring-section details help establish the intended replacement geometry.

Finished components are protected and secured for transportation according to their size, weight and shipping route. Production lead time and transit time are confirmed separately.

Frequently Asked Questions
Is the same cladding alloy suitable for WPC, PP, PE and PET?

Not automatically. The full formulation and previous wear conditions must be reviewed. Different products using the same base polymer may require different material specifications.

Is the complete barrel made from nickel-based alloy?

For this construction, the barrel body and laser-clad working layer are specified separately. The approved order should identify both materials.

Can only one worn barrel section be replaced?

Section replacement can be evaluated after checking the screw condition, adjoining sections, mounting interfaces and alignment requirements.

What information is required for a quotation?

Provide the machine model, barrel drawing or sample, bore dimensions, center distance, section length, cooling connections and quantity. Include formulation and wear history for material review.

Discuss Your Barrel Replacement with ZHITIAN

Send your drawings, barrel photographs and processing details to ZHITIAN. Our team can review the working bore, alloy layer, cooling arrangement and installation interfaces, then prepare a quotation based on the agreed specification.