| Brand Name: | Zhitian |
| Model Number: | customize |
| MOQ: | 1 |
| Price: | Timely quotation |
| Delivery Time: | 5-60 days |
| Payment Terms: | T/T,L/C |
ZHITIAN manufactures replacement barrels for co-rotating parallel twin screw extruders. This product focuses on matching the working bore, screw-axis center distance, section length and installation features to the customer’s approved drawings.
A replacement barrel must fit the screw assembly and connect correctly with neighboring sections. Selecting it by nominal machine size or external appearance alone can overlook important dimensional differences. Our technical review brings the working geometry, mounting interfaces, material specification and cooling connections into one agreed production requirement.
![]()
Precision should describe identifiable dimensions and relationships. For a twin screw barrel, these include the bore profile, spacing between screw axes, end-face relationships and locating features used during assembly.
A single general tolerance does not explain how every feature will be controlled. The drawing should identify the dimensions requiring particular attention, their reference surfaces and the applicable acceptance limits.
When requesting a quotation, provide the original drawing revision and identify any dimensions that must match existing equipment. If an earlier replacement caused installation problems, describe the interference or misalignment so the relevant features can be reviewed.
| Feature | What It Establishes |
|---|---|
| Working bore | The internal geometry surrounding the screw elements |
| Center distance | The spacing between the two screw axes |
| Section length | The axial position within the barrel assembly |
| End faces | Contact and connection with neighboring sections |
| Locating features | The intended assembly position and alignment |
| Mounting holes | Compatibility with the existing fixing arrangement |
These features must be considered together. Matching the bore diameter does not establish that the section will align correctly, while matching the external dimensions does not establish the required internal clearance.
Nominal model designations should remain separate from measured bore dimensions.
Closed sections, feeding sections, side-feeding sections and venting sections have different opening requirements. Identify the requested section’s position in the machine before confirming its design.
Provide the opening geometry, orientation and connection details. Heater mounting surfaces, thermocouple positions and cooling ports should be included where applicable.
The application review should also identify the base resin, filler or reinforcement content, operating temperature and previous wear conditions. A dimensionally compatible barrel still needs a working-surface material suitable for the processed formulation.
The barrel body material and any liner or alloy working surface should be specified separately. Material selection depends on the agreed construction and operating conditions.
For abrasive formulations, provide the filler type, concentration and wear distribution. Where corrosion is suspected, identify the relevant ingredients and observed damage. Hardness alone does not establish resistance to every form of wear or chemical attack.
If an existing specification uses a trade name or internal material code, provide its technical requirements for review. An unfamiliar designation should not be replaced with another grade merely because the names appear similar.
ZHITIAN’s barrel manufacturing includes machining and dimensional inspection. For each order, the approved drawing defines which features require verification and which results must be recorded.
Relevant checks can include bore dimensions, center distance, section length, end faces and locating or fixing features. Cooling-circuit checks and additional material inspections should be agreed according to the supplied construction.
Measurements should use defined reference conditions. Comparing a warm component with a drawing or inspection result established under different conditions can introduce uncertainty. Agree the measurement basis where dimensional comparison is important.
Photographs of an inspection process can illustrate how a feature is checked. Order-specific inspection records provide the corresponding acceptance evidence when included in the agreed supply scope.
Where drawings are unavailable, sample measurement can support replacement drawing preparation. Worn bores and damaged end faces require particular attention because their measured condition may differ from the original design.
Provide associated screw dimensions, neighboring-section information and any unused reference component available. Mark repaired or damaged areas before measurement.
For partial replacement, assess the existing screws and adjoining barrels as well. New parts should not be expected to correct excessive screw wear or alignment problems elsewhere in the assembly.
The project can be reviewed using drawings, samples and equipment information. Confirm the working dimensions and connection details before production.
No. Bore dimensions, end faces, locating features and external dimensions may have different requirements. The approved drawing should define them individually.
It can be evaluated. The proposed construction, processing conditions and relevant thermal behavior must be considered before approval.
No. Screw wear, feeding, formulation, temperature control and other equipment conditions may also affect performance.
Nanjing Zhitian Mechanical & Electrical Co., Ltd. manufactures twin screw extruder replacement parts and develops alloy material solutions. Send ZHITIAN your barrel drawing or sample details, machine information, processing conditions, quantity and required inspection documents.
Our team can review the installation requirements and material construction, identify information requiring confirmation and prepare a quotation against the agreed specification.