| Brand Name: | Zhitian |
| Model Number: | customize |
| MOQ: | 1 |
| Price: | Timely quotation |
| Delivery Time: | 5-60 days |
| Payment Terms: | T/T,L/C |
ZHITIAN manufactures replacement screw elements for co-rotating parallel twin screw extruders. This product focuses on matching the working profile, internal shaft connection, axial length and end faces to the approved component drawing and screw arrangement.
Replacement elements must fit the shaft and operate within the intended screw-to-screw and screw-to-barrel relationships. A matching outside diameter alone does not establish compatibility. The geometry and installation position must also preserve the function of the original configuration.
![]()
Start with the component drawing number, machine information and position within the screw assembly. These references help distinguish elements that appear similar but have different functions.
Depending on the configuration, the requested part may be a conveying element, kneading block, mixing element or reverse element. Confirm its working geometry rather than relying on a general description such as “standard screw segment.”
For a repeat order, provide the approved drawing revision. If the requirement differs from a previously supplied component, identify the change before quotation.
| Feature | Details to Confirm |
|---|---|
| Working profile | Outside diameter, flight geometry, pitch and direction where applicable |
| Internal connection | Spline or key geometry, fit requirements and engagement length |
| Axial dimensions | Overall length and relationship to the assembly sequence |
| End faces | Contact surfaces, orientation and drawing requirements |
These features should be reviewed together. The shaft connection establishes how the element mounts, while the working profile and orientation affect its relationship with the surrounding components.
Different features can require different tolerances. A single value applied to the complete element does not adequately define the inspection requirements.
An element that slides onto a shaft may still have an unsuitable profile, pitch or length. Dimensional mounting compatibility and processing suitability are related, but separate, requirements.
When replacing selected elements, confirm their positions and the geometry of neighboring parts. Changes to conveying direction, kneading arrangement or mixing profile should be reviewed as configuration changes.
Check the existing shaft for damage, contamination and abnormal wear before installation. If an element does not fit as expected, stop and investigate the connection dimensions and component condition rather than forcing it into place.
Provide the base resin, filler or reinforcement content, processing temperature and relevant operating history. These details support material selection and help identify conditions that may have contributed to earlier damage.
For example, a mineral-filled compound may require a different material review from a formulation where corrosion or edge chipping is the principal concern. The observed failure mechanism should guide the discussion.
Material grade, heat treatment and any agreed surface treatment must be identified separately. Hardness alone does not establish suitability, and an unexplained internal material code is insufficient for comparing replacement specifications.
Samples can support measurement and drawing preparation when original documentation is unavailable. However, worn flight tips, damaged splines or repaired end faces may no longer represent the intended geometry.
Please identify affected areas and provide unused reference components, shaft drawings or assembly information where available. Photographs help establish the review scope, but generally cannot define every dimension needed for production.
Before machining, confirm the resulting production drawing and resolve any uncertain dimensions. This is particularly important when the sample is heavily worn or the project combines material changes with partial replacement.
ZHITIAN’s screw element manufacturing includes machining and dimensional inspection against the agreed specification. The order review should establish which features require recorded results and which supporting documents are needed.
Relevant inspection items can include the working profile, outside diameter, overall length, internal connection and end-face condition. Material identification and hardness inspection requirements should be agreed for the selected grade.
When evaluating inspection evidence, check that it refers to the correct component and drawing revision. A general equipment photograph illustrates a capability; an order-specific record documents the agreed acceptance results.
Send a numbered parts list when several element types are required. Agree how the supplied parts will be identified so the receiving team can associate them with the intended assembly positions.
Packaging should protect working profiles, internal connections and end faces. Packing arrangements depend on component size, weight and transportation requirements. Production lead time and transit time are confirmed separately after the specification and quantity are established.
No. It is a starting reference. Confirm the component geometry, shaft connection and assembly position using drawings or other technical information.
It can be evaluated after checking the shaft, neighboring elements, barrel condition and intended screw arrangement.
The proposal can be reviewed. Confirm the operating conditions, failure mechanism and proposed material before approving production.
No. Barrel wear, feeding, formulation and operating settings may also affect the result.
Nanjing Zhitian Mechanical & Electrical Co., Ltd. manufactures twin screw extruder replacement parts and develops alloy material solutions. Send ZHITIAN your drawings or sample information, quantities, processing conditions and inspection requirements for a review of component fit and supply specifications.