Product Details
Place of Origin: CHINA
Brand Name: ZHITIAN
Certification: ISO9001
Model Number: SHTDN
Document: Gearboxes for twin screw ex...er.pdf
Payment & Shipping Terms
Minimum Order Quantity: Negotiation
Price: Timely quotation
Packaging Details: Wooden Box
Delivery Time: 30-60 days
Payment Terms: L/C,T/T
Supply Ability: 500 Sets / Month
Product Name: |
Twin Screw Extruder Gearbox |
Extruder Type: |
Co-rotating Parallel Twin Screw Extruder |
Drive Structure: |
Dual-Drive Design For The B Shaft |
Housing Material: |
Ductile Iron |
Gear Material: |
Carburized And Hardened Alloy Steel |
Lubrication: |
Forced Oil Circulation |
Cooling System: |
Plate Or Tubular Heat Exchanger, According To Configuration |
Interface Customization: |
Input Connection, Output Connection And Mounting Dimensions |
Product Name: |
Twin Screw Extruder Gearbox |
Extruder Type: |
Co-rotating Parallel Twin Screw Extruder |
Drive Structure: |
Dual-Drive Design For The B Shaft |
Housing Material: |
Ductile Iron |
Gear Material: |
Carburized And Hardened Alloy Steel |
Lubrication: |
Forced Oil Circulation |
Cooling System: |
Plate Or Tubular Heat Exchanger, According To Configuration |
Interface Customization: |
Input Connection, Output Connection And Mounting Dimensions |
ZHITIAN supplies gearboxes for co-rotating parallel twin screw extruders, combining a dual-drive transmission structure with connections reviewed for the customer’s equipment. The gearbox transfers motor power to two screw shafts while maintaining the rotational relationship required by the screw assembly.
For a new extrusion line or a replacement project, selection begins with the operating requirements and installation dimensions. Motor power alone does not establish suitability. Output speed, required torque, screw shaft center distance, connection dimensions and available installation space must be considered together.
![]()
![]()
![]()
The B shaft uses a dual-drive arrangement in which two gears participate in transmitting power to the shaft. This structure supports the transmission requirements of closely spaced twin screw outputs.
Gear design and assembly must work together. Gear geometry, bearing positioning, shaft alignment and internal clearances all affect operation. During replacement planning, the gearbox should therefore be reviewed as a complete transmission assembly.
The two output connections must also match the screw shaft arrangement. Correct center distance, connection geometry and assembly orientation are essential for installation and operation.
The gearbox uses a ductile iron housing and alloy steel gears with carburized and hardened tooth surfaces. Gear grinding follows heat treatment to achieve the required tooth geometry and surface condition.
Housing machining establishes the relationships between bearing seats, shaft positions and mounting surfaces. These relationships help maintain the intended alignment of the assembled transmission.
Material and inspection requirements should be defined for the selected model. Where a project requires particular bearing specifications, material records or inspection documents, these requirements can be reviewed before quotation.
Forced oil circulation supplies lubricant to the designated lubrication points and carries heat toward the cooling system. Oil selection, cleanliness and circulation conditions are important parts of gearbox operation.
Cooling can be configured with a plate or tubular heat exchanger according to the equipment requirements and available cooling water.
The cooling arrangement should be selected using the actual operating conditions. Cooling water temperature, flow, quality and maintenance access should be discussed during configuration.
A replacement gearbox needs to fit the existing drive system and screw assembly. Similar appearance or the same nominal extruder size does not establish interchangeability.
| Review Item | Information Required |
|---|---|
| Motor and input connection | Motor power, rated speed, coupling type and connection dimensions |
| Output shaft connections | Center distance, spline details, engagement length and assembly arrangement |
| Mounting layout | Foot positions, fixing holes, shaft height and surrounding space |
| Operating requirements | Required screw speed, torque and relevant load information |
| Lubrication and cooling | Available utilities, pipe connections and installation access |
For an existing line, provide the gearbox nameplate, installation drawings and photographs showing both the motor side and screw side. These references help identify dimensions that require further measurement.
For new equipment, gearbox selection can be coordinated with the motor, screw shafts, coupling and machine frame before the installation layout is finalized.
For replacement projects, the review should also consider why the original gearbox is being replaced. Leakage, overheating, abnormal noise or damaged components may involve conditions elsewhere in the drive system. Relevant operating history helps define the replacement requirements.
A change in motor power or screw speed should be reviewed before ordering. The gearbox, coupling and screw shafts must remain compatible with the revised operating conditions.
Assembly follows the confirmed model and technical requirements. Relevant checks include component fit, shaft positioning, gear backlash and gear tooth contact. The inspection scope and running-test requirements should be agreed for the order.
Before shipment, the gearbox is secured for transportation and its exposed connections are protected. Packing arrangements depend on the unit’s size, weight and shipping route.
Production lead time, shipping arrangements and required documents are confirmed during order review.
Direct replacement depends on the confirmed dimensions and operating requirements. Please provide the existing model, installation drawing, output connections and motor information for review.
No. The required ratio depends on the input speed and target screw speed. Confirm the selected model and speed requirements before specifying the ratio.
Power must be considered together with output speed, torque, loading conditions and the gearbox rating. A power figure alone is insufficient for selection.
Follow the supplied instructions for lubricant filling, circulation checks, cooling connections, coupling alignment and protective devices. Confirm the required conditions before starting the main drive.
Send your motor specifications, required screw speed, gearbox photographs and available drawings. ZHITIAN can review the transmission requirements, installation interfaces and lubrication configuration, then prepare a quotation for the agreed gearbox specification.