logo
Good price online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Extruder Machine Parts
Created with Pixso. ZT25N Co-Rotating Twin Screw Extruder Gearbox for Laboratory Lines

ZT25N Co-Rotating Twin Screw Extruder Gearbox for Laboratory Lines

Brand Name: ZHITIAN
Model Number: ZT25N
MOQ: 1
Price: Timely quotation
Delivery Time: 30-60 days
Payment Terms: L/C,T/T
Detail Information
Place of Origin:
CHINA
Certification:
Iso:9001
Product Name:
Co-Rotating Twin Screw Extruder Gearbox
Model:
ZT25N
Application:
Laboratory And Pilot Twin Screw Extrusion Lines
Output Shaft Center Distance:
22 Mm — Subject To Approved Drawing
Reference Output Speed:
500 / 600 / 800 / 900 Rpm
Reference Motor Power:
11 / 15 / 18.5 / 22 KW, Corresponding To The Selected Speed
Gear Material:
Carburized And Hardened Alloy Steel
Interface Requirements:
Input Connection, Output Splines And Mounting Dimensions According To Approved Drawings
Packaging Details:
Wooden Box
Supply Ability:
500 Sets / Month
Highlight:

twin screw extruder parts

,

two screw extruder parts

Product Description
ZT25N Twin Screw Extruder Gearbox for Laboratory and Pilot Lines

The ZHITIAN ZT25N is a gearbox for co-rotating parallel twin screw extruders. It can be reviewed for laboratory and pilot equipment used in formulation development, material trials and small-scale process evaluation.

Selection depends on the required screw speed, transmission loading and installation arrangement. A matching model name or motor power does not, by itself, confirm that a gearbox will fit an existing machine. The input connection, output shaft geometry, center distance and mounting dimensions must also be checked.

ZT25N Co-Rotating Twin Screw Extruder Gearbox for Laboratory Lines

Reference Speed and Power Configurations

The following configurations provide a starting reference for a ZT25N selection review. Final ratings and dimensions must follow the current approved technical specification.

Reference Output Speed Corresponding Motor Power
500 rpm 11 kW
600 rpm 15 kW
800 rpm 18.5 kW
900 rpm 22 kW

The reference output shaft center distance is 22 mm. This describes the spacing between the two output shaft axes, not the screw diameter.

These entries are corresponding configurations, not freely interchangeable limits. A 22 kW motor should not be paired with a different output speed solely because both values appear on the same product page. Confirm the complete operating requirement before ordering.

Match the Gearbox to Your Trial Conditions

Laboratory equipment may run different formulations and operating settings across successive trials. The gearbox review should consider the intended operating envelope rather than one nominal production point.

Please identify:

  • Speed requirements: normal operating speed and the required adjustment range.

  • Motor information: rated power, rated speed and available drive details.

  • Processing conditions: polymer, additives, fillers and expected operating load.

  • Duty pattern: typical run duration, starts and stops, and relevant load changes.

  • Protection arrangement: coupling type and the machine’s overload protection requirements.

A wider speed range does not establish that the same torque is available throughout that range. Confirm the gearbox rating together with the motor and drive characteristics.

Transmission Structure and Gear Construction

The ZT25N uses a dual-drive arrangement for the B shaft, with two gears participating in power transmission to that shaft. The structure addresses the transmission requirements of closely spaced twin screw outputs.

The gears use alloy steel with carburized and hardened tooth surfaces, followed by gear grinding. Housing machining and assembly establish the required relationships between the shafts, bearing positions and gear meshes.

Correct assembly remains important alongside individual gear accuracy. Shaft positioning, bearing fits, backlash and tooth contact should follow the requirements of the selected gearbox configuration.

Installation Interfaces for Replacement Projects

For an existing laboratory extruder, provide installation drawings and photographs showing the motor side, screw side and mounting base.

Interface Details to Confirm
Motor side Input shaft dimensions, coupling connection and available space
Screw side Output center distance, spline geometry and engagement length
Mounting base Fixing holes, shaft height and mounting surfaces
Assembly layout Orientation, surrounding components and maintenance access
Auxiliary connections Lubrication and cooling connections where applicable

Similar external dimensions do not establish direct interchangeability. Output connections and shaft positioning must match the screw assembly, while the input arrangement must suit the motor and coupling.

Lubrication, Cooling and Start-Up Preparation

Confirm the lubrication and cooling configuration for the supplied unit during order review. The quotation should identify the included equipment and any utilities or connections required at the installation site.

Before first operation, follow the supplied instructions for lubricant selection, filling, circulation checks and cooling connections where fitted. Confirm coupling alignment, guards and protective devices before starting the main drive.

For replacement projects involving overheating or abnormal noise, provide the operating history. The original problem may involve lubrication, alignment, loading or other machine conditions that also need correction.

Inspection and Delivery Requirements

Production and assembly follow the approved model configuration and order requirements. Agree the required dimensional checks, running-test scope and supporting documents before quotation.

Useful records can include the approved installation drawing, output connection details and the agreed inspection results. Test duration, loading conditions and acceptance criteria should be specified where required rather than assumed from a general product description.

The gearbox is secured for transportation, with exposed connections protected. Production lead time and transit time are confirmed separately according to the order and destination.

Frequently Asked Questions
Does ZT25N mean the screw diameter is exactly 25 mm?

No. The model designation is an identification reference. Confirm the actual screw dimensions and output connection requirements from the equipment drawings.

Is output torque stated per shaft or for both shafts?

The quotation must identify the convention used. Do not compare torque figures unless the speed, rating conditions and single-shaft or combined-output basis are clear.

Can an existing motor be retained?

It can be evaluated after checking its rated power, speed, coupling connection and intended operating range.

What information is required for a quotation?

Send the machine model, motor specifications, required screw speeds, installation drawing, output spline details, quantity and delivery destination.

Request a ZT25N Gearbox Review

Nanjing Zhitian Mechanical & Electrical Co., Ltd. designs and manufactures twin screw extruder gearboxes and replacement components. Contact ZHITIAN with your equipment information so our team can review the operating requirements, installation interfaces and supply scope before preparing a quotation.